Description
Product information
Wifi Repeater 300mbps Extender – Booster 802.11n – White
How to Install the Repeater?
Plug it into the socket
1. Choose a suitable placement and plug it into the socket.
2. When it is on, reset it.
Connect repeater’s wifi via cell phone
1. Open your phone’s wifi set-up window.
2. Connect the repeater’s wifi.
Set up the repeater via browser
1. Open your browser and key in 192.168.0.1
2. Go into the wizard and set up it step by step:
a. the default account and password both are admin
b. Choose the existing wifi what you want to relay
c. set up its wifi password which should be same with the existing wifi.
Connect the repeater’s wifi again
Connect the repeater’s wifi after configuration is done. And then you could enjoy surfing even in dead zone.
Warning!!!
The repeater is not a router
Please notice: the repeater does not include router function. Please do not use it as a router. It can only extend existing WiFi’s signal range.
Make sure at least 60% signal received by the repeater
Please make sure that the placement of the repeater should be covered by at least 60% signal strength of the existing WiFi.
Avoid interference
Wave oven, washing machine and other electric appliances may affect the repeater’s performance. Especially, the main wall which includes steel may decrease its signal dramatically. Please avoid these between the repeater and the place which you want to relay to.
IP conflict
Sometimes, perhaps you cannot go into the wizard, which is caused by IP conflict. Please log in to your router’s wizard and change its IP as 192.168.1.1 or 192.168.2.1.
Features: “This upgrade Version WPS Wireless-N Repeater is mainly used for providing free WiFi service at your home and office etc. Want to see your favourite online TV Show but the TV is on the dead zone? Your long and old house cut your video call with your friends? The bell can not work because it can not receive wifi? Now, say goodbye to the dead zone with this MakeTheOne wifi repeater. Enough of no wifi!”
Application: Setting up a Wireless Infrastructure Network, For a typical wireless setup at home (as shown below) , please do the following: Wireless Repeater Mode: You will need WiFi AP/Router internet access, plug the wifi extender into a power slot, after configuration to be an access point Wireless ap Mode: You will need broadband Router internet access, Connect the wifi repeater to your router/switch with RJ-45 Cable Color: Polish White Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Power supply unit: 100V-240V AC Wireless Signal Rates With Automatic Fallback 11n: Up to 300Mbps(dynamic) ; 11g : Up to 54Mbps(dynamic) ; 11g: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
Receiver Sensitivity 300M : -68dBm@10% PER 11M : -85dBm@8% PER 150M : -68dBm@10% PER 6M : -88dBm@10% PER 108M : -68dBm@10% PER 1M : -90dBm@8% PER 54M : -68dBm@10% PER
Package Includes : 1 x Wireless Wifi Extender Repeater 1 x RJ-45 networking cable(1 Meter length) 1 x user manual.
Have you found what you are looking for? If not, check out our list of Networking Devices. Obejor Computers supplies durable laptops, quality smartphones, electronics, and more. Shop with us today.
